Brand KONTAKT CHEMIE
Product Code: DBKC1001
| Attribute | Value | Description | |
| Chemical Base | Acrylic Resin | Provides durable and flexible protection. | |
| Color | Transparent | Does not conceal the components of the circuit board. | |
| Dielectric Strength | High (> 20 kV/mm) | Provides excellent electrical insulation. | |
| Temperature Resistance | Within minus;40°C +125°C | Resistant to harsh environmental conditions. | |
| Drying Time (Touch) | Approximately 10-15 minutes | Fast application and short waiting time. | |
| Full Curing | 24 Hours | Maximum protection and durability. | |
| Application Area | PCB, Coil, Winding, Transformer | Wide range of uses area. |
Electronic devices and circuit boards (PCBs) are constantly vulnerable to external factors such as moisture, dust, dirt, thermal changes, and even short circuit risks. This leads to malfunctions, performance loss, and shortened device lifespan. This is where Plastic 70 protective spray, the choice of professionals and hobbyists, comes into play.
Plastic 70 is an acrylic-based, transparent coating varnish designed to protect electronic circuit boards against moisture, corrosion, dust, and chemical vapors.
Superior Insulation: It has high dielectric resistance. This reduces the risk of short circuits and preserves signal integrity.
Excellent Adhesion: Adheres quickly and firmly to most metal, glass, and plastic surfaces.
Fast Drying: Dries quickly after application, forming a flexible and durable film layer.
Wide Temperature Range: Provides effective protection over a wide temperature range, typically from -40°C to +125°C.
Solderability: Soldering can be done over the coating if needed, facilitating repair or modification operations. It makes it easier.
UV Fluorescence: Glows under UV light for monitoring of the applied area.
Plastic 70 spray is indispensable, especially for electronic equipment with harsh operating conditions:
Automotive Electronics: ECUs and control units in vehicles exposed to humidity and vibration.
Industrial Automation: PLC boards and sensors exposed to chemicals and dust in factory environments.
Communication Devices: Base stations and radio equipment operating in open areas or humid environments.
Marine Applications: Electronic circuits on boats against seawater and humidity.
PCB Repair and Prototyping: The final protective layer of newly designed or repaired circuit boards.
Preparation: Ensure the surface to be coated is completely clean and dry. Use a suitable cleaner (e.g., Contact Cleaner Spray) to remove dirt, grease, and flux residue.
Masking: Mask any connectors, switches, or moving parts where you do not want a protective layer.
Application: Apply the spray in a thin, even layer from a distance of approximately 15-20 cm. If possible, apply two thin layers, one vertically and one horizontally.
Drying: It reaches touch dryness quickly at room temperature (approximately 20°C). For full curing (maximum protection), it is generally recommended to wait 24 hours.
Payment Information
When will my order arrive?
• The products you purchase are delivered within the delivery date range specified on the product detail page. You can also check the delivery date of your orders in the “My Orders” section under “My Account.”
• If the product says “Ships in 24 hours,” your order will be shipped within 24 hours. These products are “FAST DELIVERY” items.
• When your order is out for delivery, you will be notified via SMS by the shipping company.
• After your order has been shipped, you can track its shipping stages through the “Where is My Cargo?” link in the “My Orders” tab under “My Account.”
Is there a delivery fee?
• For all products without the “Free Shipping” label, shipping costs are automatically calculated by the system based on the package size and will be shown in your cart during checkout.
My order arrived when I wasn’t home.
• If you are not at the address, the shipping company leaves a note informing you that you can pick up your package from the nearest branch.
• If you do not pick up your package from the branch within 3 days, your order will be returned to our company.
What should I pay attention to during delivery?
Always check your order in front of the delivery person.
• If there is damage to the package or the product, you can return it to the shipping company without accepting it.
Request a “Damage Report” from the delivery person.
If you sign the delivery slip and then notice damage or missing items, you can request a return code through the easy return option on your order page.
Return the product/package to our company along with the report and invoice via the shipping company.
Are deliveries made on official holidays?
• Shipping companies deliver to homes every day except Sundays.
Where is my cargo?
When your order is shipped, you will receive a notification titled “depoyabak.com | Your Order Has Been Shipped” and an SMS from the shipping company.
You can track your shipment in 2 ways after receiving these messages:
• Using the “Track Cargo” link in the notification message.
• Using the “Where is My Cargo?” link in the “My Orders” tab under “My Account.
Secure Shopping
Fast Delivery
Installment Options on All Cards
Easy Exchange Available
